HomeTechnologyA Mechanical Keyboard's Cleaning Procedure

A Mechanical Keyboard’s Cleaning Procedure

The drawback is that grime and dust can adhere to the keyboard before the switches or electronics malfunction. The most crucial keyboard maintenance chore of cleaning will assist in looking for debris. Leaking is a different issue. So, they will receive their fair share.

The keys up above are from a different keyboard. But it serves to highlight how useful this manual may be. So, let’s quickly review the three stages of mechanical keyboard cleaning.

Preventive Cleaning

Regular keyboard cleaning is necessary. It’s crucial to stop dirt from building up. This is crucial if you’re eating close to a keyboard. The coated metal plate that holds each key will eventually become covered in dust and possibly food particles. Because you have to brush after applying the powder, it is both a pain and a hassle.

  1. Remove the keyboard.
  2. To clean the utensils of dust, use a vacuum. The finest outcomes are obtained by lightly pushing the keyboard with the suction hose of the vacuum cleaner. This will activate every key on the keyboard. Without moving brushes, smaller portable vacuum cleaners perform admirably.
  3. Use a microfiber cloth that is just moist to wipe off the whole keyboard.
  4. Use a different cloth to dry. Avoiding using paper towels. This is because paper towels remove dust from the keyboard and leave behind microscopic scratches.

In any event, refrain from cleaning the keyboard with compressed air. Two unfavorable side effects might occur: First, it is extremely chilly when the air is evacuated from the box. Condensation may develop on rusted or damaged metal surfaces due to this. It may also result in stains or erosion. Dust can also be blown onto keyboard switches using canned air. By removing dust and air that is at room temperature from the switch, vacuum cleaners address these issues.

Deferred Cleaning

Even after routine vacuuming and sweeping, some debris still adheres to the stove. Fortunately, there are tried-and-true techniques that can address these issues.

  1. Remove the keyboard.
  2. To remove the keycaps from the keyboard, use a keycap remover. Most of the bigger keys (range, fade, shift, etc.) are strung together, making it hard to remove them. It is advisable to clean it using a microfiber cloth that has been mildly dampened with water if you don’t feel comfortable taking it off and putting it back on.
  3. Use toothpaste or dish soap to clean the buttons.

Put the caps into the bottle. Keys should be submerged in hot water with two pills in the tub. After at least six hours, rinse the keys well and let them dry. The water will start evaporating after a little while, along with the plus (+) symbol on the keyboard. Dish soap is an excellent alternative because washing is challenging.

For cleaning keys, denture tablets are the best solution. They clean off all traces, disinfect, and degrease.

  1. To remove debris attached to the disc while the keyboard is wet, use a tiny, stiff brush (or a dry ear tip that can pick up some undesired debris). Do not place bristles close to the switch shaft. The key may acquire dust in Brussels. Give up vacuuming
  2. Using a manual version of the full-size machine without the cylinder or extension tube, suction the pad uniformly. Turn the keyboard upside down and let the dust fall out if there is any that the vacuum cleaner cannot remove.
  3. Use a moist cloth to clean any sticky stains on the plate. For removing messes, cotton swabs or other tiny cleaning instruments work just as well. Avoid getting the keyboard’s keys wet if at all feasible.
  4. To prevent dust buildup, keep the keyboard flat until the keys are dry.
  5. Replace each keyboard.
  6. Use a moist microfiber towel to wipe off the casing.
  7. Use a different towel to dry. Unlike paper towels, Scratches and grime are left behind by paper towels.

Modern Cleaning

Consider purchasing a second-hand keyboard. If the previous owner had used it in a damp basement and had sandwiched a bunch of Cheetos between the buttons, that would not be good. You could have been the previous owner. We’re not here to pass judgment. particularly if you want to tidy up. This manual is for unclean keyboards both inside and out. The following will void the warranty if it is still functional.

Follow the Delayed Erase directions for steps 1 and 2. then take these actions:

  1. If the mechanical keyboard is dirty, use an ultrasonic cleaner. Additionally, it may be used to clean toys and jewelry, among other home chores. Use the button soaking technique indicated in step 3 of the delayed cleaning instructions if you’re not interested.

After partly filling the keys with cleaning solution and adding water, insert two dentures. After that, let it run for 6 to 10 minutes. If there are any extra instructions on your machine, such as minimum fill lines, to ensure that each button is in contact with the ultrasonic transducer, shake the device every two minutes as you follow these instructions.

To clean, ultrasonic cleaners oscillate water at a high frequency. Super cavitation results from this, removing deposits without endangering the surface.

  1. Press when you’re finished. Lay the plus pole on its side to air dry. The residual water may not evaporate for some time.
  2. Gently lift the keyboard cover. Make sure the container has the screws in it. The organizing will aid in the reassembly procedure if there are varied dimensions. If a cable needs to be unplugged, take caution when doing so. Use your smartphone to take images if it’s difficult to recall which one goes where.
  3. Lay the circuit board and board aside after removing the keyboard. You can use a brush to clean half of the casing if the dirt is moderately bad. Apply a moist towel as a follow-up.
  4. You may use a medium-bristle brush soaked in dish soap to clean half of the casing if it’s unclean (and there are no electrical components). It should be properly cleaned, then dried on both sides with a cloth. Let the water evaporate from the challenging locations (such as screw holes).
  5. To remove debris from the tile, use a tiny, stiff brush. Do not place bristles close to the switch shaft. The key may acquire dust in Brussels. Give up vacuuming
  6. Use a moist cloth to clean any sticky stains on the plate. For removing messes, cotton swabs or other tiny cleaning instruments work just as well. Avoid getting the keyboard’s keys wet if at all feasible.
  7. While drying other components, use a clean towel with the PCB side facing down to minimize dust formation.
  8. After everything has dried, replace any hard keys affixed to the chassis side. The spacebar, plus, and enter keys are among the examples. You can lubricate the stabilizer if you find the vibration bothersome.
  9. The keyboard is folded.
  10. Alter your keyboard.

Your keyboard should appear professional and operate flawlessly after a thorough cleaning.

Dealing With Spills

The deadliest enemy of mechanical keyboards is leaked. The water does not pose a serious threat. We advise you to promptly remove the keyboard and give it more time to dry. However, flavored beverages will be a major mess, especially sweet ones. In the event of a spill, avoid moving or tilting the keyboard and wait until the liquid has dried before testing the keyboard on the associated computer. This may result in system failure by spamming the key or harming the USB port.

  1. You can use the keyboard after late cleaning or extensive cleaning as long as the buttons are not wet or no keys are fried.
  2. Purchase a brand-new keyboard.
  3. If you know how to solder, you can take out every switch on the keyboard. The switch and keyboard assembly may now be cleaned and separated. The keys harmed by the leak can also be changed. Given how labor-intensive and time-consuming this technique is, it is not advised. It also voids any applicable warranties.


You recently gained knowledge about mechanical keyboard maintenance. Have you ever considered purchasing one? Try a new model of mechanical keyboard with various switches if you have one. The delight is in the enormous diversity!

Recent Post